top of page


Public·18 members

How to Download and Use AVRprog v.1.4 for Programming AVR Microcontrollers

How to Download and Use AVRprog v.1.4 for Programming AVR Microcontrollers

If you are looking for a free and easy-to-use programmer for Atmel AVR microcontrollers, you might want to try AVRprog v.1.4. This software is a USB-serial-programmer that can program the device in serial mode, without using a bootloader. This means that you can use the entire memory of the microcontroller for your application.

avrprog v.1.4 download

In this article, we will show you how to download and use AVRprog v.1.4 for programming AVR microcontrollers. We will also explain some of the features and benefits of this software, as well as some of the alternatives you can consider.

How to Download AVRprog v.1.4

To download AVRprog v.1.4, you need to visit the SourceForge website[^1^], where you can find the latest version of the software, as well as the source code and documentation. You can also download the USB drivers and the schematic of the hardware required for connecting your microcontroller to your PC.

Once you have downloaded the software, you need to unzip it and run the setup file. Follow the instructions on the screen to install the software on your PC. You may need to restart your PC after the installation is complete.

How to Use AVRprog v.1.4

To use AVRprog v.1.4, you need to connect your microcontroller to your PC using a suitable cable and adapter. You can find the schematic of the hardware on the SourceForge website[^1^]. You also need to make sure that your microcontroller has a compatible fuse setting for serial programming.

Once you have connected your microcontroller, you need to launch AVRprog v.1.4 from your desktop or start menu. You will see a window with several tabs and options. You can select your microcontroller model, your COM port, your baud rate, and your programming mode from the drop-down menus.

You can also browse and select your hex file that contains your program code from your PC. You can verify, erase, write, or read your microcontroller memory using the buttons on the toolbar. You can also view the status and progress of the programming process on the bottom of the window.

Features and Benefits of AVRprog v.1.4

AVRprog v.1.4 has some features and benefits that make it a useful tool for programming AVR microcontrollers. Some of them are:

  • It is free and open source, so you can modify it according to your needs.

  • It is easy to use, with a simple and intuitive interface.

  • It supports a wide range of Atmel AVR microcontrollers, including ATmega, ATtiny, AT90S, and AT86RF series.

  • It provides an external programming of MCUs, so that you can use the entire memory for your application.

  • It has a fast programming speed, thanks to its USB 2.0 interface.

  • It has a low hardware cost, as it only requires a simple cable and adapter.

Alternatives to AVRprog v.1.4

If you are looking for other options for programming AVR microcontrollers, you can consider some of these alternatives:

  • AVRdude: This is a command-line tool that can program various types of AVR devices using different types of programmers[^2^]. It is widely used by many developers and hobbyists.

  • mikroProg for AVR: This is a USB 2.0 programmer that supports over 300 Atmel AVR devices[^3^]. It has an integrated development environment (IDE) that allows you to write, compile, debug, and program your code in one place.

  • OpenPLC Editor: This is an IEC 61131-3 compliant PLC editor that can upload PLC code directly to any board or system running OpenPLC Runtime. OpenPLC is an open-source programmable logic controller that is based on easy-to-use software.



Welcome to the group! You can connect with other members, ge...

Group Page: Groups_SingleGroup
bottom of page